Product Specification
| Model | MIG 500I |
| Phase | Single Phase |
| Brand | DH |
| Automation Grade | Semi-Automatic |
| Country of Origin | Made in India |
| Input Voltage | 220V AC +/- 15% |
| Frequency | 50-60 Hz |
| Input Current | 35.1 Amp |
| Power | 25.3 kVA |
| Output Current | 500 Amp |
| Output Voltage | 16.5-52V |
| Duty Cycle | 60% |
| Power Factor | 0.93 |
| Efficiency | 85% |
| Wire Feeding Speed | 15 m/min |
| Wire Diameter | 1 mm |
| Output Cable | 50 + mm |
| Weight | 42 kg |
| Insulation | F |
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.
